• GRUPA ORLEN (strona główna)
Dla niedowidzącychRozmiar tekstu: AAA
ORBITON 25/55-80 HIMA

1. Description of the product 

ORBITON 25/55-80 HiMA (“hard HiMA”) is designed for special courses requiring exceptional deformation resistance (parking lots for heavy vehicles, container terminals, etc.) and where very heavy, slow traffic takes place. Since this binder is very hard, it should be used only in justified cases and suitable site conditions need to be ensured. It should be clearly stated that ORBITON 25/55-80 HiMA is not a direct replacement for PMB 25/55-60 and is not intended for AC EME. For​ typical pavement constructions, ORBITON 45/80-80 HiMA is recommended instead of ORBITON 25/55-80 HiMA.

2. Properties  

Division based on types and requirements for highly modified bitumen in Poland acc. to National Annex NA, table NA.2, to standard PN-EN 14023:2011/Ap2:2020-02

Property Unit Test Method Requirement​
Penetration at 25°C​ 0,1 mm EN 1426 25-55
Softening Point °C EN 1427 ≥80
Cohesion |Force ductility tested using ductilometer (50 mm/min)
J/cm2
EN 13589
EN 13703
≥5 at 15°C
Resistance to hardening | Change of mass
%
EN 12607-1
≤0.5
Resistance to hardening | Retained penetration at 25°C
% EN 12607-1
≥60
Resistance to hardening | Softening point increase °C ​EN 12607-1
≤8
Flash point °C EN ISO 2592 ≥235
Fraass breaking point °C EN 12593
≤-15
Elastic recovery at 25°C
% EN 13398
≥80
Plasticity range
​​°C
EN 14023
Item 5.2.8.4​
NR
​Drop in softening point​ after EN 12607-1 ​​°C ​EN 1427
​TBR
Elastic recovery at 25°C after EN 12607-1 ​​% ​EN 13398
​≥50
​Storage stability – difference in softening point ​​​°C ​EN 13399
EN 1427
​≤5
​Storage stability – difference​ in penetration ​0.1 mm ​EN 13399
EN 14276
NR

* change of mass may be a positive or negative value
NR – No Requirement
TBR – To Be Reported
​​
 
 

ORLEN Group brands